Journal Articles (Peer-Reviewed)
Joseph, Sarah, Irene Peters and Hanno Friedrich (In press): Can Regional Organic Agriculture Feed the Regional Community? A Case Study for Hamburg and North Germany, Ecological Economics.
Ottemöller, Ole and Hanno Friedrich (2019): Modelling change in supply-chain-structures and its effect on freight transport demand, Transportation Research Part E: Logistics and Transportation Review, 121: 23-42.
Abstract: The paper introduces a model to determine possible impacts of changes in supply chain structures on freight transport demand. Examples are centralisation or vertical (des)integration within supply chains. The model first generates a population of establishments and commodity flows in space which is then manipulated according to different scenarios. It uses methods from transport planning and optimisation as well as scenario technique. To demonstrate its applicability a centralisation in food supply chain structures in Germany is analysed. The results show that a more educated discussion is needed for such changes since the range of possible impacts is large.
Balster, Andreas and Hanno Friedrich (2019): Dynamic freight flow modelling for risk evaluation in food supply, Transportation Research Part E: Logistics and Transportation Review, 121: 4-22.
Abstract: This paper presents a calibrated dynamic multi-scale multi-regional input–output (MSMRIO) model of the German food supply system based on real data. The model comprises 51 commodity groups from farm to fork differentiating three different temperature ranges as well as living animals. Spatially, it works on an aggregate level of 402 regions within Germany as well as its 50 most important trading nations. It determines the commodity flows and the additionally needed transport capacity in case of disruptions. Showing how changes in production, inventories, sourcing, and consumption affect commodity flows, the model uncovers vulnerabilities and makes risk evaluation possible.
Hansen, Ole, Hanno Friedrich and Sandra Transchel (2019): An inventory management approximation for estimating aggregated regional food stock levels, International Journal of Production Research, 175 (1): 1-17.
Abstract: Food is an important resource in disaster management, and food stock levels hold significance for disaster mitigation research and practice. The presence or absence of food stocks is a vulnerability indicator of a region. A large part of overall food stock, before a disaster strikes, is held by private companies (retailers, wholesalers and food producers). However, there is little-to-no information on the food stock levels of commercial companies, and no approach exists to derive such information. We develop an approximation model based on essential inventory management principles and available data sources to estimate aggregated food stock levels in supply networks. The model is applied in a case example that features dairy product stock levels in the German state of Saxonia. The resulting overall stock levels are normalised, and their usability is showcased in a simple vulnerability analysis. Disaster managers are provided with a model that can be used estimate otherwise unavailable data and facilitates investigations into the regional resilience of an area. The limitations of our study are based on the aggregated nature of the supply network structure and data usage (i.e. in the model, we do not consider any seasonality or trend effects).
Horn, Abigail L. and Hanno Friedrich (2019): Locating the source of large-scale outbreaks of foodborne disease, Journal of The Royal Society Interface, 16 (151).
Abstract: In today’s globally interconnected food system, outbreaks of foodborne disease can spread widely and cause considerable impact on public health. We study the problem of identifying the source of emerging large-scale outbreaks of foodborne disease; a crucial step in mitigating their proliferation. To solve the source identification problem, we formulate a probabilistic model of the contamination diffusion process as a random walk on a network and derive the maximum-likelihood estimator for the source location. By modelling the transmission process as a random walk, we are able to develop a novel, computationally tractable solution that accounts for all possible paths of travel through the network. This is in contrast to existing approaches to network source identification, which assume that the contamination travels along either the shortest or highest probability paths. We demonstrate the benefits of the multiple-paths approach through application to different network topologies, including stylized models of food supply network structure and real data from the 2011 Shiga toxin-producing Escherichia coli outbreak in Germany. We show significant improvements in accuracy and reliability compared with the relevant state-of-the-art approach to source identification. Beyond foodborne disease, these methods should find application in identifying the source of spread in network-based diffusion processes more generally, including in networks not well approximated by tree-like structure.
Ottemöller, Ole and Hanno Friedrich (2016): Opportunities of sectoral freight transport demand modelling, Case Studies on Transport Policy, 4 (1): 9-12.
Abstract: Abstract This paper discusses the opportunities of sectoral freight transport demand models. The work is based on literature and insights from interdisciplinary research in the field of production, logistics and transport. First, current and future factors influencing freight transport are discussed. Next, a brief summary of the traditional transport modelling approach and recent extensions and adaptations of freight transport models is given. As interdisciplinary research has shown, the impact of the identified factors on the development of freight transport is strongly dependent on the sector under investigation. As a consequence, this paper proposes the application of a sectoral modelling approach. The automotive and food sectors in Germany are used as examples to further examine the opportunities of sectoral freight transport demand models.
Friedrich, Hanno and Jonathan Gumpp (2014): Simplified Modeling and Solving of Logistics Optimization Problems, International Journal of Transportation, 2 (1): 33-52.
Abstract: Logistics optimization problems are often complex (NP - hard). Especially for large problem scopes in logistics and new agent-based freight transport models which have to solve these problems for many agents, simplifying modelling and solving procedures are necessary in order to reduce the level of complexity. Due to the variety of existing approaches and the specifics of each problem it is often difficult to find an appropriate method. This paper seeks to facilitate this process as it identifies ‘meta’ heuristics within literature, i.e. abstract courses of action that, when adapted, have proven successful in various problems. It presents a classification of general simplification principles that are useful for reducing the complexity of logistics problems, in order to facilitate understanding between academics and practice. The derivation of the related principles is based on the examination of five problems in logistics literature: facility location, distribution system, lot size, bin packing, and vehicle routing.
Liedtke, Gernot and Hanno Friedrich (2012): Generation of logistics networks in freight transportation models, Transportation, 39 (6): 1335-1351.
Abstract: This article analyzes the concept of logistics networks in the context of behavioral freight transport modeling. Starting from the basic definition of networks, the different perceptions of networks in transportation science and logistics are worked out. The micro‐macro gap, as a main challenge in freight transport modeling, is explained by the existence of logistics networks on a meso level. A taxonomy of modeling methods dealing with logistics networks is defined, based on two characteristics: the changeability of networks within models (fixed, partially variable and variable networks) and the form of cost functions mapped (economies of scale, constant average cost, and diseconomies of scale). For each category, different possible modeling methods and their application in existing freight transport models are discussed. A special focus is placed on methodologies and models that map variable networks.
Journal Articles (Professional)
Dichter, A., M. Rothkopf, F. Bauer, M. Bäuml, J.-F. Rösch, C. Bärwind, M. Schuster, M. Lommer and H. Friedrich (2018): Travel and logistics: data drives the race for customers, McKinsey&Company.
Abstract: available for download: https://www.mckinsey.de/~/media/mckinsey/locations/europe%20and%20middle%20east/deutschland/news/presse/2018/2018-07-12/travel-and-logistics-data-drives-the-race-for-customers.ashx
Frey, Werner, Gernot Liedtke, Hanno Friedrich, Carina Thaller, Benjamin Dahmen, Axel Wolfermann, Theo Janßen and Wulf Hahn (2016): Empfehlungen zur Modellierung des Wirtschaftsverkehrs, Straßenverkehrstechnik, 10.
Abstract: Die Modellierung des Wirtschaftsverkehrs gewinnt aufgrund der aktuellen Anforderungen und Fragestellungen zunehmend an Bedeutung. Daher werden in der FGSV parallel zur Entwicklung entsprechender Regelwerke und Empfehlungen für den Personenverkehr auch der aktuelle Stand der Technik zur Modellierung des Wirtschaftsverkehrs beleuchtet sowie Empfehlungen und Hinweise zu seiner Modellierung entwickelt. Zunächst werden dazu die Fragestellungen analysiert. Im Anschluss daran werden die Unterschiede in der Modellierung des Wirtschaftsverkehrs zum Personenverkehr erläutert. Dabei werden der Modellaufbau, die verwendeten Modellierungsmethoden sowie eine Auswahl von Softwarewerkzeugen vorgestellt und analysiert. Nachdem die wesentlichen Datenquellen für Wirtschaftsverkehrsmodelle benannt wurden, werden abschließend einige Beispiele für Wirtschaftsverkehrsmodelle dargestellt. Due to increasing requirements the modelling of commercial traffic receives more and more attention. The German Road and Transportation Research Association (FGSV) compiled the state-of-practice of modelling transport and included, thus, specific recommendations for commercial transport. This article provides an overview of commercial transport modelling issues: First, the different purposes of modelling commercial transport are listed. In the next step the difference between private and commercial transport modelling is discussed. This section is subdivided into model architecture and modelling methods. An overview of software products is enclosed as well as a description of the relevant input data. The article closes with some examples for commercial transport models.
Friedrich, Hanno (2016): Versorgung in Krisenzeiten sichern, Lebensmittelzeitung, 14. Oktober.
Friedrich, Hanno (2010): Simulation of logistics in food retailing for freight transportation analysis (Dissertation), Karlsruher Institut für Technologie (KIT): Karlsruhe, Germany.
Abstract: The study contributes to fill the gap between freight transportation analysis and logistic research. It describes the model SYNTRADE, a simulation model that reproduces logistic structures in the German food retailing sector. Logistic decisions and their interdependencies are simulated based on heuristics from the field of logistic optimization. The model provides the possibility to analyze changes in logistics and freight transport demand on a company, as well as on an overall sector level. http://digbib.ubka.uni-karlsruhe.de/volltexte/1000020602
Friedrich, Hanno (2004): Voraussetzungen für eine Aktivitäten-basierte Güterverkehrsmodellierung (Diploma Thesis), Karlsruher Institut für Technologie (KIT): Karlsruhe, Germany.
Friedrich, Hanno (2010): Simulation of Logistic Structures in Food Retailing to Estimate Demand for Freight Transportation: Proceedings of the WCTRS Conference on Transportation Research 2010.
Poschmann, Peter, Manuel Weinke, Andreas Balster, Frank Straube, Hanno Friedrich and André Ludwig (2019): Realization of ETA Predictions for Intermodal Logistics Networks using Artificial Intelligence, in: Clausen, Uwe, Sven Langkau and Felix Kreuz (ed.): Advances in Production, Logistics and Traffic: Proceedings of the 4th Interdisciplinary Conference on Production Logistics and Traffic, Springer International Publishing: Cham, 155-176.
Abstract: Intermodal logistics networks such as the maritime transport chain require a precise interaction of numerous actors. However, due to their complexity, the closely interlinked processes are highly susceptible to disruptions. Companies are constantly faced with the challenge of dealing effectively and efficiently with disruptions and resultant delays. At the same time, they are confronted with increasing logistical requirements related to higher quality and flexibility demands of customers (Straube et al. 2013). Supply chains are becoming increasingly vulnerable, due to the associated necessity to cope with increasing volatility while simultaneously reducing risk buffers in processes as a result of rising cost pressure. Combined with ongoing changes due to digitization, this situation contributes significantly to an increasing need for improved information transparency among companies and their customers.
Thanh, Thi My Troung and Hanno Friedrich (2017): Legalizing the illegal parking, a solution for parking scarcity in developing countries, in: Ulengin, Fusun, Keping Li and Manfred Boltze (ed.): Selected Proceedings of the WCTRS Conference on Transportation Research 2016, 4950-4965.
Abstract: The objective of this study is to understand how and to what extend illegal parking should be legalized, giving the benefit for parking users, urban planning, and transport planning. From literature, the policies and theories based on the lessons from other countries have provided the basis that can be applied in investigating a new parking management paradigm. Empirical surveys are conducted to examine the parking conditions, parking user’s behavior and the consequence of illegal parking spaces in the core city center in Hanoi, Vietnam. Then, the requirements of para-parking (legalization of illegal parking spaces) are formulated including the change process that involves parking authorities, parking operators, and parking users. An in-depth analyze is undertaken to look at opportunities, risks and forms of para-parking and finally a proposal for a qualitative economic impact assessment of parking facility investment is given.
Rolko, Kevin and Hanno Friedrich (2017): Locations of Logistics Service Providers in Germany - The basis for a new freight transport generation model., in: Ulengin, Fusun, Keping Li and Manfred Boltze (ed.): Selected Proceedings of the WCTRS Conference on Transportation Research 2016, 1061-1074.
Abstract: Integrating the decisions and the behavior of Logistics Service Providers (LSPs) into freight transport models is essential to be capable of accurately describing future developments in freight transport systems. Knowledge on the spatial distribution patterns of LSP locations, e.g. to represent network routing of shipments more accurately, is of paramount importance. Moreover, attributes characterizing the LSP locations are helpful to relate them to traffic generation. Therefore, the objective of this paper is to present intermediate results of an empirical study on LSP locations in Germany. Drawing on these findings, the freight generated by German less than truckload networks is estimated on an aggregate level. These findings shed some light on the spatial and structural patterns of the locations allocable to the German logistics sector and the freight transport it generates. These insights are highly relevant for freight transport and land use planning policies.
Boltze, Manfred, Frederik Rühl, Ulrich Berbner and Hanno Friedrich (2015): The interdisciplinary decision map - A reference model for production, logistics and traffic: TRB 94th Annual Meeting Compendium of Papers DVD.
Abstract: Due to strong interdependencies between production, logistics and traffic, a decision in one of these fields has impacts on the others. However, decision makers in and around today’s supply chains rarely consider effects of their decisions on other participants of the supply chain or the traffic system. Thus, a tool for decision support, which clearly illustrates the variety of impacts of a decision, is highly desirable. Accordingly, this paper presents a reference model in the context of production, logistics and traffic, called Interdisciplinary Decision Map (IDM). The IDM allows for describing and analyzing interdisciplinary impacts of decisions across the disciplines. Thus, it can serve as decision support tool for decision makers out of the considered domains. The IDM’s applicability is demonstrated by using it to analyze selected impacts of an heavy goods vehicles (HGV) toll’s introduction on production, logistics and traffic.
Thaller, Carina, Benjamin Dahmen, Gernot Liedtke and Hanno Friedrich (2015): Freight Transport Demand Modelling – Typology of Characterizing Freight Transport Demand Models, in: Clausen, Uwe, Hanno Friedrich, Carina Thaller and Christiane Geiger (ed.): Commercial transport - Proceedings of the 2nd Interdiciplinary Conference on Production, Logistics and Traffic 2015, Springer: Cham, Switzerland, 39-54.
Abstract: Due to the structural heterogeneity of freight transport and its long-term subordinate consideration, there have been low research activities in this field as well as low motivations to integrate this segment into transport demand models for decades. There is also no generally valid framework for freight transport modelling in comparison to passenger transport modelling. Without a common framework, it is difficult to exchange ideas between scientists and to enable an efficient communication and solid agreements between a client and a contractor of a transport modelling service. This contribution presents a typological order of characteristics of freight transport demand models which covers their internal structures and employed methods. In addition, a systematic overview of selected international freight transport demand models is given.
Hansen, Ole and Hanno Friedrich (2015): An Inventory-Focused Analysis of German Food Supply Chains: The Case of Dairy Products, in: Clausen, Uwe, Hanno Friedrich, Carina Thaller and Christiane Geiger (ed.): Commercial transport - Proceedings of the 2nd Interdiciplinary Conference on Production, Logistics and Traffic 2015, Springer: Cham, Switzerland, 337-347.
Abstract: This work was created as part of the research project SEAK, which looks into possible causes and consequences of food shortfalls in Germany and is moreover also aimed at developing and evaluating possible mitigation strategies for these shortfalls. For the management of shortfalls in food supply it would be, as a first step, crucial to have information on existing inventories. Making for example decisions on the reallocation of food products into regions affected by disasters is only possible if knowledge about the (regional) availability of food quantities is present in the first place. This could be considered as a necessary transparency. However, in the German food sector, it is hard to get data about the inventories kept by companies like producers, logistic service providers (LSP’s), wholesalers or retailers. This is due to the fact that usually companies are not obliged to publish this information. Moreover, this information is also considered confidential in most companies, since it would give competitors insight into their business model and processes, which are oftentimes the basis for their success. Since information concerning food inventories is not publicly available, it has to be derived in another manner. This work is aimed at providing a scientific basis for the modelling of inventories along food supply chains. More specifically, it does so for the food commodity group of dairy products. We gathered information on all available food products, but limit this particular analysis to dairy products as a showcase of our approach. First, we introduce the data set used for the analysis and the methodology applied to it. In a next step, characteristics of typical German dairy supply chains are described using practical evidence as well as literature findings. The description follows the supply chain’s structure from start to finish, downstream. In the end, concluding remarks are made and possible further research ventures are suggested.
Motzke, Andreas, Andreas Balster, Ole Hansen, Maja Herrmannsdörfer, Frank Schätter, Hanno Friedrich, Wolfgang Raskob, Markus Wiens and Frank Schultmann (2014): The SEAK Project: Decision Support for Managing Disruptions in Food Supply Chains, in: Thoma, Klaus (ed.): Future Security - 9th Security Research Conference, Berlin, September 16 - 18, 2014, Fraunhofer-Verl: Stuttgart, 581-584.
Balster, Andreas and Hanno Friedrich (2014): Modelling Dynamic Commodity Flows Using the Example of the German Food Supply Sector, in: Gammelgaard, Britta, Günter Prockl, Aseem Kinra, Jesper Aastrup, Peter Holm Andreasen, Hans-Joachim Schramm, Juliana Hsuan, Malek Malouf and Andreas Wieland (ed.): 26th Conference of the Nordic Logistics Research Network : NOFOMA 2014, Copenhagen, Denmark: June 11-13, 2014.
Münzberg, Thomas, Ulrich Berbner, Hanno Friedrich, Tina Comes, Wendelin Gross, Frank Schultmann and Hans-Christian Pfohl: Decision Support for Critical Infrastructure Disruptions: An Integrated Approach to Secure Food Supply, 312-316.
Abstract: Supplies of food and water are essential in disaster management, particularly in the very early chaotic phases when demand and available resources are highly uncertain, information systems are disrupted, and communication between communities, food suppliers, retail and emergency authorities is difficult. As many actors and organisations are involved in ever more complex food supply chains, cooperation and collaboration are vital for efficient and effective disaster management. To support decision-makers facing these problems, this paper introduces a scenario-based approach that integrates simulation of disruptions in food supply chains, and qualitative expert assessment to develop consistent scenarios that show the consequences of different strategies. To choose the best individual measures for all relevant actors and to compare it with the best overall strategy approaches from multi-criteria decision analysis are used.
Rühl, Frederik, Tobias Freudenreich, Ulrich Berbner, Ole Ottemöller, Hanno Friedrich and Manfred Boltze (2013): Production, Logistics, and Traffic: A Systematic Approach to Understand Interactions: Selected Proceedings of the WCTRS Conference on Transportation Research.
Abstract: Desicion-makers in and around today's supply chains are facing tough every day. However, when making decisions, they rarely consider what effects their desicions cause upon other participants of the supply chain or traffic management. This is mostly due to the lack of appropriate tools which help indicating the possible effects. Such tools are necessary to tackle the inherent complexity of the whole supply chain system. This paper describes how to construct and design such a tool for this interdisciplinary environment, called an Interdisciplinary Decision Map (IDM). The IDM is a powerful tool to visualise complex relationships, while at the same time retaining usability by showing relevant information only. We show how tu use a specific instance of an IDM to facilitate a better understanding to the underlying processes of other supply chain participants. The soundness of our approach is backed by findings from an interdisciplinary research project.
Liu, Heng, Hanno Friedrich and Li Zhang (2013): Modeling of Freight Transport Distribution in Germany – A Discussion of Traditional Distribution Models and a new Procedure for Performance Improvement: Selected Proceedings of the WCTRS Conference on Transportation Research.
Abstract: This work aims to discuss modeling issues on solving the transport distribution problem in freight transport. The traditional distribution model – the Gravity Model – is introduced in detail with the focus on its forecasting capability of freight transport distribution. Through analyses on the base of observed and predicted data of freight transport in Germany, it is found that, compared to applying the Gravity Model, directly balancing the observed distribution from the last period using the Furness Method can generate more closer predictions to the official predictions in a planning project of the German Federal Ministry of Transport, Building and Urban Development. However, the re is a doubt about whether this Furness Method itself brings about an impact on the deterrence exponent. Based on the proposition that the Furness Method dilutes the deterrence effect of transport costs, a compensating procedure is developed in this work as a supplement to the traditional process, offering a new thinking to improve the prediction performance of distribution models.
Ottemöller, Ole and Hanno Friedrich (2013): A Concept for Modeling Freight Transport within Supply Networks of the Automotive Industry: Proceedings of the WCTRS Conference on Transportation Research.
Rühl, Frederik, Moritz Mörner, Hanno Friedrich and Özhan Özsucu (2013): Assessing the impacts of HGV tolls and transport logistics: Proceedings of the WCTRS Conference on Transportation Research.
Abstract: In this article, basic characteristics of HGV toll systems are described. Based on that, these systems' impacts on entrepreneurial processes and resulting changes in business choices are discussed. Furthermore, a case study on hauliers' reactions on the German HGV toll is presented. The results show that the haulage industry only has to deal with marginal impacts since costs are usually passed along to the customer, this is why operational changes do not seem necessary.
Gabler, Manuel, Stefan Schröder, Hanno Friedrich and Gernot Liedtke (2013): Generierung der Nachfragestrukturen für die mikroskopische Simulation des städtischen Distributionsverkehrs im Lebensmittelhandel, in: Clausen, Uwe and Carina Thaller (ed.): Wirtschaftsverkehr 2013, Springer: Berlin, Heidelberg, 32-48.
Abstract: Wirtschaftsverkehrs- und City-Logistik-Modelle ermöglichen die Simulation des Verkehrsverhaltens sowie die Untersuchung und Bewertung von verschiedenen verkehrspolitischen Maßnahmen. Prominente Maßnahmen sind beispielsweise Einfahrverbote bestimmter Lkw-Typen, räumlich und zeitlich differenzierte Mautgebühren oder die Nutzung von Güterverkehrszentren. Diese Arbeit ist eingebettet in einen übergeordneten Ansatz zur mikroskopischen Modellierung des städtischen Distributionsverkehrs im Lebensmitteleinzelhandel. Neben der Verhaltensmodellierung der Entscheidungsträger sowie der physischen Simulation der Fahrzeugbewegungen liegt die große Herausforderung in der Gewinnung der Modelleingangsdaten zur Beschreibung des umfassenden Entscheidungsproblems in der Distributionslogistik. Die Ableitung dieser Daten sowie die Illustration am Beispiel eines Berlin-Szenarios ist Gegenstand des vorliegenden Aufsatzes.
Friedrich, Hanno, Steffen Despotov, Li Zhang and Patrick Kroner (2012): Measures of Supply Chain Risk Management: Proceedings of the 9th International Meeting on Logistics Research.
Friedrich, Hanno and Ole Ottemöller (2011): Transferring Methods from Social Dynamic Network Analysis to Freight Transportation: Proceedings of the 16th International Conference of Hong Kong Society for Transportation Studies.
Babani, Jola, Gernot Liedtke and Hanno Friedrich (2011): Identifikation von Tourtypen in Fahrzeugtagebüchern, in: Clausen, Uwe (ed.): Fachtagung Wirtschaftsverkehr 2011: Modelle - Strategien - Nachhaltigkeit: Dortmund, 55-75.
Liedtke, Gernot, Hanno Friedrich, Patrik Jochem, Daniel Keultjes and Stefan Schröder (2010): Estimation of the Benefits of Shippers from a Multi-Modal Transport Network: Selected Proceedings of the WCTRS Conference on Transportation Research 2010.
Abstract: This paper estimates the shippers‟ reactions and their economic benefits from a multimodal transport network called LOGOTAKT. For this purpose, an econometric shipper model is being estimated in which the major factor influencing logistics decisions – the balance between warehouse and storage cost – is explicitly taken into account. The functional form is being deduced from the first order condition of Total Logistics Cost function minimization. Transport cost is expressed in form of a complex function depending on order size and the transport distance in order capture the effect of economies of scale in transportation. It is estimated based on empirical data of distribution obtained from two major German companies. Simulations show that the new multimodal transportation system has a significant impact on shipment size distributions changing them in favor of smaller shipments. This leads especially to significant reductions in warehouse costs. Finally, some implications of the analytical results on transport policy are provided: To achieve further modal shift from road to rail, public financial support and the regulatory framework must put railways into the position to consolidate shipments and to exhaust economies of scale.
Friedrich, Hanno and Gernot Liedtke (2009): Consideration of Logistics for Policy Analysis with Freight Transport Models: Proceedings of the 9th Conference on Applied Infrastructure Research: Berlin.
Abstract: In recent years a rising attention for logistics in politics and transport analysis can be ob-served. Therefore, freight transport models increasingly put more attention on logistics. How-ever, logistics is mostly modeled in a very simplified way and different parts of logistics are considered. Modelers have limited options to build more mature logistics models: A detailed representation of logistics requires the description of a heterogeneous economic landscape leading to very high data demand and it requires to model combinatorial logistic problems exceeding the processing capability available. Therefore a balance has to be found between mapping logistic behavior in a “reality-like” way and the need to keep the model as simple as possible. Based on conceptual frameworks on logistic choice levels and logistic structures the paper shortly reviews a selection of existing modeling approaches. This and a detailed discus-sion of two modeling experiences show future strategies in freight transport modeling to-wards finding this balance.
Friedrich, Hanno and Gernot Liedtke (2007): Demand modeling for microscopic models in freight transport ‐ Modeling the Splitting of the flow of goods with Total Logistic Costs: Proceedings of the 11th World Conference on Transport Research Society (WCTRS).
Friedrich, Hanno, Gernot Liedtke and Michael Spahn (2007): Die Relation zwischen Wirtschaftsakteuren als zukünftige Bezugsgröße für mikroskopische Güterverkehrsmodelle, in: Clausen, Uwe (ed.): Wirtschaftsverkehr 2007: Modelle - Strukturen - Umsetzung: Dortmund, 25-34.
Horn, Abigail L. and Hanno Friedrich (In press): The Network Source Location Problem in the Context of Foodborne Disease, in: Ghanbarnejad, F., R. Saha Roy, F. Karimi, J.-C. Delvenne and B. Mitra (ed.): Dynamics On and Of Complex Networks III: Machine Learning and Statistical Physics Approaches (available as eBook), Springer.
Boltze, Manfred, Frederik Rühl, Ulrich Berbner and Hanno Friedrich (2017): The Interdisciplinary Decision Map: A Reference Model for Production, Logistics and Traffic, in: Abele, Eberhard, Manfred Boltze and Hans-Christian Pfohl (ed.): Dynamic and Seamless Integration of Production, Logistics and Traffic: Fundamentals of Interdisciplinary Decision Support, Springer International Publishing: Cham, 31-47.
Abstract: Due to strong interdependencies between production, logistics and traffic, a decision in one of these fields has impacts on the others. However, decision-makers in and around today’s supply chains rarely consider effects of their decisions on other participants of the supply chain or the traffic system. Thus, a tool for decision support, which clearly illustrates the variety of impacts of a decision, is highly desirable. Accordingly, this chapter presents a reference model in the context of production, logistics and traffic, called Interdisciplinary Decision Map (IDM). The IDM allows for describing and analysing interdisciplinary impacts of decisions across the disciplines. Thus, it can serve as decision support tool for decision-makers out of the considered domains. The IDM’s applicability is demonstrated by using it to analyse selected impacts of an HGV toll’s introduction on production, logistics and traffic.
Ottemöller, Ole and Hanno Friedrich (2017): Implications for Freight Transport Demand Modelling from Interdisciplinary Research: Developing a Concept for Modelling Freight Transport Within Supply Networks of the Automotive Industry, in: Abele, Eberhard, Manfred Boltze and Hans-Christian Pfohl (ed.): Dynamic and Seamless Integration of Production, Logistics and Traffic: Fundamentals of Interdisciplinary Decision Support, Springer International Publishing: Cham, 185-207.
Abstract: The freight transport system is a major determinant for the competitiveness of logistics and production activities. On the other hand, logistics and production shape freight transport demand. Therefore, freight transport demand models are needed that can capture the influence and requirements of ongoing trends in production and logistics. In this chapter, the German automotive industry is used as an example of how certain trends might influence the development of freight transport demand. Here, the impact of changes in the supply chain structure on freight transport demand is emphasised. Furthermore, data sources available on the sectoral level are discussed. Based on the insights into ongoing trends, available data and sectoral characteristics, a concept for a sectoral freight transport model for the German automotive industry is developed.
Open reference in new window "Implications for Freight Transport Demand Modelling from Interdisciplinary Research: Developing a Concept for Modelling Freight Transport Within Supply Networks of the Automotive Industry"
Friedrich, Hanno, Lorant Tavasszy and Igor Davydenko (2013): Distribution Structures, in: Tavasszy, Lorant and Gerard de Jong (ed.): Modelling freight transport, First edition ed., Elsevier, 65-87.
Abstract: Distribution structures are important elements of the freight transportation system. Goods are routed via warehouses on their way from production to consumption. This chapter discusses drivers behind these structures, logistics decisions connected to distribution structures on the micro level, and possible modeling methodologies on the macro level. The authors show the connection between the micro and the macro level and highlight advantages of the different modeling approaches.